Ideal for high temperature application up to 1200¡É
for ashing organics, heat treating tools and ties,
heat treating glasses and melting experiments.
Main Specifications
¢ºTemp. Range : up to 1200¡É
¢ºController : Digital Programmable PID
3 Pattern 16 segment
¢ºHeater : Kanthal embedded
¢ºInsulation : Vacuum Molded Ceramic
¢ºCapacity : 0.3 / 4.5 / 12 / 27 Liters
Insulation
Heavy-duty molded ceramic fiber insulation
Hard, abrasion resistant, designed to support heavy loads.
Precision PID Control
Microprocessor-based PID control, 3 programs (Pattern) and 16 segments for ramp (up and down) and dwell (time hold) temperature control.
Stable High Temperature
Temperature range up to 1200¡É
(Operating temperature is under 1000¡É)
Kanthal Heater
Heating elements embedded is molded cera-mic fiber insulation offer long service life, protection from harmful materials and mech-anical shock.
Kanthal-A1 heating element on all four sides of chamber for maximum heat transfer and chamber uniformity
Specifications & Ordering Information
Cat.No |
Description |
Size |
JSMF-270T |
Up to 1200¡É |
27L |
JSMF-140T |
Up to 1200¡É |
14L |
JSMF-120T |
Up to 1200¡É |
12L |
JSMF-45T |
Up to 1200¡É |
4.5L |
JSMF-30T |
Up to 1200¡É |
3.0L |
Model |
JSMF-30T |
JSMF-45T |
JSMF-120T |
JSMF-140T |
JSMF-270T |
Chamber Volume (Capacity) |
3.0L |
4.5L |
12L |
14L |
27L |
Temp. |
Heating Type |
Kanthal A-1 Embedded Heater from 4-Side |
|
Range |
Up to 1200¡É (Normal operating temp.is under 1000 ¡É) |
Accuracy |
¡¾5.0 ¡É at 800¡É |
Uniformity |
¡¾10.0 ¡É at 800¡É |
Control |
Main Controller |
Programmable Digital Controller |
|
Wait on/off Timer |
3 Pattern, 16 Segment Programmable |
Sensor |
CA |
Safety Device |
Temp. |
None |
|
Electrical |
Electrical Leakage Breaker |
Dimensions |
Inner |
130X250X90 |
150X300X100 |
200X300X200 |
250X350X160 |
300X300X300 |
WxDXH mm |
Outer |
390X475X525 |
420X530X550 |
480X550X660 |
530X590X620 |
580X590X760 |
Material |
Insulation |
Vacuum modeled ceramic fiber |
|
External |
Steel 1T with Epoxy Powder Coating |
Inner Door |
Front Door with modeled ceramic fiber insulation |
Electrical Requirement |
220 VAC 50 Hz or 220 VAC 60 Hz | |